Dealing with Clogged Drains in Your Toronto Home

One of the most common Toronto plumbing problems in most homes is clogged drains. This is something that must not be ignored, or else, you will be faced with bigger problems, especially with the internal structures and on your pipelines. While calling a plumber may be the first thing that will come to your mind when it comes to this ordeal, you can opt to deal with the situation on your own if the problem appears to be manageable.

What to Do?

You can deal with clogged drains by applying a technique that works most of the time. Start performing the task if there is standing water. If there is none, you can opt to pour water into the area where the problem appears. The drains and air vents must be sealed. Place the suction cup of your plunger on the drain until you are quite certain that everything has been covered.

You have to exert effort in pushing and pulling the suction. Remember that you are doing this to move the clog. After several pushes and pulls, remove the plunger and observe whether the water is already going down the drain easily. If there still seems to be a problem, no matter how minor, simply repeat using the plunger until the problem is completely solved.

Checking Various Parts of Your Home

There are vital parts of your home that you need to regularly check for clogged drains. This is important in order to save water and avoid spending too much on replacing damaged pipelines and other fixtures.

For the sink in your bathroom and kitchen, first make sure that all the air holes are covered with duct tape or cloth, then use the plunger as described above. While many homeowners opt to use expensive cleaning agents, it is best to first try fixing the problem with a plunger in order to save some money.

If the clogged drain is in your bathtub, first pull off the overflow cover plate, then place a rag over the hole and start plunging the drain. For showers, since there are no air holes to cover, you can simply proceed with plunging the drain.